Before the folding filter element leaves factory, what should you pay attention to?

The fine water filter element, the pleated filter element, is of high hygiene standards. There are many things that must be inspected and tested before it leaves the factory. This method ensures the highest quality foldable filter elements and gives customers greater peace of mind.


The pleated filter element, which is part of the filter element, is a finer water filter. It is a high-hygienic, sterile filter element. Its application is quite broad, so it is important to stop the integrity testing before leaving the factory.


It is important to conduct a goodness test on factory-folded filter elements to make sure that they can meet customer application requirements.


The integrity test of the pleated filter elements is an experiment that detects the bubble point, diffusion flow and other parameters. This experiment offers the benefits of easy detection and high reliability. The hydrophilic membrane filter element of the experiment is tested using pure water and the hydrophobic membrane filtr element with 60% IPA.


Before you use the automatic integrity tester, confirm its accuracy, inspect the air tightness and verify that the inlet pressure is sufficient to reach the requested level. The inlet pressure requested is typically set at 5-7bar and the test temperature to 20-25degC.


Components: Filter, pressure gauge, combined joints, clean air source and liquid pump. The connection is completed by the wet process.


Turn off the valve, close the valve, close the exhaust valve, turn the water pump on, turn on other exhaust valves, then turn on the water pump. Close the exhaust valve and turn off the water pump.


After opening the valve completely, flush it for 5-10 seconds. Adjust the valve and adjust the pressure gauge 1. The pressure gauge 1 should be at P1=4-4.45bar. If the flow rate is greater than 5L/min for 10 seconds, flush out the wet filter element.


The higher the flow rate, and the longer the flushing period, the easier it will be to wet the filter elements, and the more accurate your test results.


Guangzhou Lvyuan Water Purification Equipment Co., Ltd. specializes in the production of various filter elements, welcome to consult!

Comments

Popular posts from this blog

Guide to Making Custom Dust Bags, Drawstring Bags

7 Eco-Friendly Tote Bags for Shopping

Washing methods of various functional fabrics