What do I do if my filter element gets sucked out of place during work?

Sometimes, the wrong use of the filter elements or the mismatched element can cause unnecessary problems and accidents. Flattening is a common problem.

How can we avoid these problems? We must first understand why the filter element has become flattened.


1. The filter element has become blocked and cannot be replaced.


The filter element became blocked by pollutants from work, so it was not cleaned up in time. This resulted in an increase of pressure and insufficient strength, which led to the filter element being flattened.


2. Filter element selection is not appropriate.


The filter element must be selected for its suitability in the current environment. Filter element flattening can also occur if the pressure or accuracy of the filter elements is not sufficient.


Customers believe that stainless steel sintered mesh and sintered felt filters will prevent this from happening. However, this is not true. These two types of stainless-steel filter elements are not only resistant to pressure, but they also have higher pressure resistance than their own. Flattening will occur.


To achieve a better result, we must adjust to work pressures, such as adding a skull.


3. Incorrect installation: The filter element must be installed accurately and correctly.


Guangzhou Lvyuan Water Purification Equipment Co., Ltd. specializes in the production of various filter elements, welcome to choose!

Comments

Popular posts from this blog

Guide to Making Custom Dust Bags, Drawstring Bags

7 Eco-Friendly Tote Bags for Shopping

Washing methods of various functional fabrics