Introduction of Ultrasonic Flow Meter

Working Principle of Ultrasonic Flow Meter

The strap-on ultrasonic flowmeters supplied by Kaidi are based on the working principle of the time difference method.


Ultrasonic Flow Meter adopts the measurement principle of the time difference method. It uses the ultrasonic wave emitted by the sensor to propagate in the flowing fluid. The sound wave propagation speed in the downstream direction will increase, and the backward direction will decrease. In the same propagation distance, there will be different transmission times. According to the difference between the transmission time and the measured The relationship between fluid velocity measures the fluid velocity.


The flow rate of the fluid is different in different positions in the tube. The flow rate in the center of the tube is faster than the flow rate near the wall of the tube. The flow velocity distribution of the fluid in the pipeline can be represented by the flow velocity cross-sectional distribution diagram.


By setting the flowmeter and considering the cross-sectional distribution of the flow velocity, the average flow velocity can be calculated. Then the volume flow of the fluid can be obtained according to the cross-sectional area of the pipe.


Strap on Ultrasonic Flow Meters Application

Kaidi concentrates on the development of flow measurement technology. The products serve real-time flow measurement and participation process control in the production process. The main customer industries are the chemical production process, fine chemical production, cleaning industry, beverage industry, etc.


With the world's most advanced time measurement chip (time resolution of 50ps), Kaidi has developed a series of straps on ultrasonic flow measurement.


It takes only 2-3 minutes to complete the whole process from installation to measurement. It also adopts the current popular OLED display, which makes it easy to read in low light conditions.


Strap on Ultrasonic Flow Meters is widely used in the production process flow measurement and monitoring. The application of the product continuously and effectively controls the flow of the fluid, so as to improve the yield of the product and even save the input of the personnel, bringing benefits to the production enterprise.


Strap on Ultrasonic Flow Meters can meet different pipe requirements: stainless steel pipe, carbon steel pipe, copper pipe, plastic pipe(PVC, PVDF, PPR, PPH, HDPE, etc.).


Application of Ultrasonic Flow Meters

Ultrasonic Flow Meters also satisfies different clean fluid measurements: various acids, alcohols, chemical solvents, alcohol, beverage water, Coca-Cola water, etc.

Comments

Popular posts from this blog

Guide to Making Custom Dust Bags, Drawstring Bags

7 Eco-Friendly Tote Bags for Shopping

Washing methods of various functional fabrics